NIMBUS WIMI 5000

Price : AED4,800
Availability: Out of stock

Product Highlights:

    1080i60/1080p60 HD encode/decode with H.264 Baseline Profile Level 4.2 Very low latency, < 20 ms Supports 3D video of HDMI v1.4a(WiMi5100/5300/5500) Supports SDI/HD-SDI/3G-SDI (WiMi5200 only) Supports both TV & monitor standards Supports high quality audio, 16-bit 48kHz analog audio

Details

Zero ( < 20ms) latency of H.264 compression up to 1920x1080p60

WiMi5000 series provides wireless HDMI transmitter/receiver solution at the resolution of 1920x1080p60. Hardware-based H.264 compression engine is used for encoding full HD video signals. So, it can deliver full HD (1920 x 1080p60) video at 6 ~ 50 Mbit/s without any degradation of video quality. There is almost zero latency between transmitter (encoder) and receiver (decoder), approximately within 20 milliseconds. Super low latency is especially important for applications requiring real-time video transmission with the interaction. So, the WiMi5100/5500 can be used for delay sensitive applications, such as Remote PC, IP KVM, PC2TV or gaming console with the HDTV.

Linear PCM and compressed audio, Dolby digital and DTS

The WiMi5000 series transmitter and receiver can transmit all audio formats, such as uncompressed audio with sampling rates of 44.1kHz, 48kHz, 96kHz and 192kHz(16-bits only) at 16-bits and 24-bits, and compressed audio, 7.1 channel Dolby Digital Plus and DTS-HD of 6Mbps.

Wireless: Maximum radio coverage of 150m (500 ft) at line of sight
The video and audio data from WiMi5000 series transmitter and receiver are transmitted and received through the standard IEEE 802.11n wireless LAN. Although the air condition is varying from time to time, it is enough to deliver audio/video data because WiMi5000 series requires typically 6~50 Mbit/s, which is tenth of wireless LAN bandwidth. 

Wire-line: Ethernet/IP (WiMi5300T/R)
The WiMi5300 supports Ethernet wireline including public IP network at maximum 50~60 Mbps without any degradation of video quality. This will replace high cost optical transmitter used for full HD video transmission.

Provides one-to-many multicasting capability (option)
It supports one-to-many multicasting function. In Wi-Fi Mode, four receivers can display full HD video simultaneously.

Video input
Supports 720P60 Frame Packing 3D video
Supports 1080P24 Frame Packing with Top & Bottom

Digital audio input
HDMI : HDMI compatible audio
Pass Through Uncompressed 7.1 ch. with 24-bits, 96kHz sampling
Pass Through Compressed 7.1 ch. of Dolby Digital Plus/DTS-HD
Encoding of moving pictures
H.264 (MPEG-4 Parts10: AVC)
Baseline Profile with Level 4.2 (1920 x 1080p60)

Wire-less output for audio/video
Supporting IEEE802.11n with internal antenna
MIMO interface
Up to 40m range through the wall (150m @ LOS)
Wire-less input for audio/video
Supporting IEEE802.11n with internal antenna
MIMO interface
Up to 40m range through the wall (150m @ LOS)

Decoding of moving pictures
H.264 (MPEG-4 Parts10:AVC)
Baseline Profile with Level 4.2 (1920 x 1080p60)
Audio output
HDMI : HDMI compatible audio
Pass Through Uncompressed 7.1 ch. with 24-bits, 96kHz sampling
Pass Through Compressed 7.1 ch. of Dolby Digital Plus/DTS-HD

Video output
HDMI: up to 1080p60, HDMI v1.4a
Supports 720P60 Frame Packing 3D video
Supports 1080P24 Frame Packing with Top & Bottom

Only registered users can write reviews. Please, log in or register

MOST VIEWED