Blackmagic Pocket UltraScope

Price : AED2,200
Availability :

Product Highlights:

    • 3Gbps SDI and Optical-Fiber SDI Scope
    • Software
    • For Editors & Colorists
    • Broadcast-Quality Accuracy
    • Parade Display
    • Waveform Display
    • Component Vectorscope View
    • Histogram for Location Shoots
    • Audio Level
    • Picture View with VITC Timecode
Qty - +


The UltraScope from Blackmagic is a 3Gbps SDI and optical-fiber SDI scope. It is designed for editors and colorists. This unit is intended to provide the technical accuracy required for use in broadcast and engineering video work.

3Gbps SDI & Optical-Fiber SDI Scope
This unit is a 3Gbps SDI and optical-fiber SDI scope designed for professional use.
Parade Display for Colorists
A real-time RGB parade waveform view is available for color correction. You can see the color balance in blacks, mids, and whites. RGB parade is also well suited for checking for illegal colors because any video that drops below the black line, or above the 100% line, is an illegal RGB color. Parade can also be switched to component to allow you to align equipment and decks.
Waveform Display for Alignments
When adjusting video levels or matching black background levels when keying, the waveform display can facilitate this work. Waveform view can be set to luminance-only or composite. Composite video is synthesized from the SDI input, which can make it easier to align traditional equipment such as decks. Since many editors know and understand composite waveform monitors, this module is usually very easy for them to use, despite the fact that it is a digital solution.
Component Vectorscope View
A vectorscope is the only way to ensure the accuracy of the colors you see. Use this device to determine if color has been removed or nulled out for accurate white balance or adjust tint, among many other adjustments and readings.
Histogram for Location Shoots
Historgram view allows you to see where your pixels are distributed in the spectrum of black to white, thereby ensuring that you make the proper capture and can more effectively manage post-production work.
Audio view for Monitoring Levels
Keep track of audio with (8) channels of audio metering plus a stereo phase meter. The stereo phase meter plots left-right audio as an XY scope display so you know exactly what your audio is at all times. The audio scope allows you to see mono audio as you see a vertical line or stereo audio as a scope puff in all directions. Audio problems such as clipping and out-of-phase audio can be seen as a left- or right-leaning display.
Picture View with VITC Timecode
The picture view allows you to track video input so you always know what feed is connected to your Blackmagic UltraScope. Input video is selected from either the optical-fiber SDI or regular SDI inputs. The video standard is automatically detected and displayed above the video image. VITC timecode and RP188 HD timecode are also detected and read into a timecode counter on the top, right-hand side of the video image.

Connections SDI Video Input:
1 x 10 bit SD, HD and 3 Gbps HD switchable
SDI Video Output:
1 x 10 bit loop thru SD, HD and 3 Gbps HD switchable
Optical Fiber Video Input:
1 x 10 bit SD, HD and 3 Gbps HD switchable via LC connector
Optical Fiber Video Output:
1 x 10 bit loop thru SD, HD and 3 Gbps HD switchable via LC connector
Supported Video formats:
525i NTSC, 625i PAL, 720HD and 1080HD
SDI Audio Input:
8 channel embedded in SD and HD
SDI Audio Output:
8 channel embedded in SD and HD
Optical Fiber Audio Input:
8 channel embedded in SD and HD
Optical Fiber Audio Output:
8 channel embedded in SD and HD
Multiple Rate support:
Standard definition SDI, high definition SDI and 3 Gbps high definition SDI
Firmware for cards built into software driver
Loaded at system start or via updater software Standards HD Format Support:
1080p 23.98/24/50/59.94, 1080i50, 1080i59.94, 720p50 and 720p59.94
SD Format Support:
625/25 PAL and 525/29.97 NTSC
SDI Compliance:
SMPTE 424M, 259M and 292/296M
Video Sampling:
Color Precision:
4:2:2 10-bit
Color Space:
4:2:2 YUV
SDI Metadata Support:
VITC and RP-188 timecode
Audio Sampling:
Television rate of 48kHz at 24 bit
Card Type:
PCI Express 1 lane, compatible with 1, 4, 8 and 16 PCIe slots Signal Processing Hardware-based, real-time, colorspace conversion Dimensions (HxWxD) PCI-Express 4-lane card type Weight Not specified by manufacturer
Packaging Info
Package Weight 0.45 lb
Box Dimensions (LxWxH) 5.4 x 5.3 x 1.1"

Only registered users can write reviews. Please, log in or register